Hugong Economig 201

The Hugong Economig 201 is a single phase inverter mig welder excellent for panel steel & right up to 10mm plate.

The 201 will weld with gas shielded or gasless flux core steel, aluminium or stainless wire (from 0.6-1.2mm). Will take up to 300mm (15kg) spools.

Comes with a FREE 36v heated co2 regulator for a limited time (plugs into the back of the machine so no extra cables are required).

Comes with a genuine Binzel 4M mig torch, 4M earth lead & v-groove drive rollers for 0.8, 0.9, & 1.0mm steel/stainless mig wire.
You can turn the wire feed soft start on/off depending on your application & select between 2T & 4T trigger latching for maximum operator control.